Detail Wood Moisture Tester MD-710
Wood drying requires much time, and the nature of the wood, including contraction, can change depending on the advancement of the drying technique. Moisture control from factors such as a comparatively high-temperature bottom can cause problems to come about for some moisture testers. However, the MD-710 is equipped with an Anchor-Type moisture sensor which cancels out any effect caused by contraction and can monitor any sensor drop-out, floating, or snapping.
Ï Specifications MD-710
Measurement Method Electrical resistance
Applications All normal types of wood
Measurement Range 4-129% ( 50° C standard, depends on the type of wood)
Measurement Interval Automatically measures once every two hours
Input Ports Moisture sensor, Temperature sensor ( 6 each)
Display Format Digital ( LED, smallest displayed unit: less than 30% : 0.1% , 30% or greater: 1% )
Display Content Moisture, Temperature, Channel, Correction value
Output RS-232C interface
Power Source AC100V( 50/ 60Hz)
Dimensions & Weight 320( W) X300( D) X150( H) mm, 6.0kg
Accessories Electric drive ( for use with input sensor) , Grounding
Options Printer( VZ-330)
Tampilkan Lebih Banyak