Back to Top

Hi, Guest!

  LOKASI :  Kota Administrasi Jakarta Pusat

Bergabung Selama :

BAGIKAN :   

Bagikan :
  • ADVANTECH
  • Disposable Syringe Filter Units – DISMIC 25mm

Disposable Syringe Filter Units – DISMIC 25mm

Update Terakhir
:
01 / 12 / 2019
Min. Pembelian
:
0 Biji
Dilihat Sebanyak
:
30 kali

Harga

CALL
Bagikan
:

Perhatian !

Perusahaan ini terdaftar sebagai Free Member. Hindari melakukan pembayaran sebelum bertemu penjual atau melihat barang secara langsung. COD (Cash On Delivery) atau bertemu langsung dengan penjual merupakan metode transaksi aman yang kami sarankan.

Detail Disposable Syringe Filter Units – DISMIC 25mm

Disposable Syringe Filter Units – DISMIC/ LABODISC • Minimum sample hold-up: Unit housings are specifically designed to maximize sample recovery • High purity: Non-pigmented housing and integral filter sealing assure that filtrates will not be adulterated due to pigment, dye, or adhesives leaching into the filtrate • Convenient: Each unit is clearly marked with an identifying code to denote pore size, membrane material and housing polymer • Sterile: Units can be purchased presterilized and individually packaged, or nonsterile in bulk pack • All polypropylene can be autoclaved Acrylic can not be autoclaved SPECIFICATIONS DISMIC LABODISC 3 mm 13 mm 25 mm 30 mm 50 mm Housing material - PP PP PP Acrylic PP PP Housing Diameter mm 3 13 25 25 30 50 Filtration Area cm2 0.06 0.9 4.0 4.0 4.8 19.6 Hold-up Volume mL < 0.01 < 0.03 < 0.1 < 0.1 < 0.1 < 3.0 Suggested capacity per filter unit mL < 2 mL < 10 mL < 100 mL < 100 mL 100 mL Pressure limit MPa 0.51 0.51* 0.51* 0.51 0.88 0.34 psi 74 74* 74* 74 128 49 Maximum Operating Temperature ° C 60 60 60 45 180 60 ° F 140 140 140 113 356 140 Connections inl et: female luer-lockoutlet: male luer slip- 7– 13.5 mm hose barb * 13HP, 25HP; Pressure Limit = 0.39 MPa ( 57 psi) Mixed Cellulose Esters ( MCE, Nitrocellulose) • Properties: A hydrophilic membrane • Higher protein binding than cellulose acetate for most proteins • High porosity provides a high flow rate Nylon • Properties: Strong, hydrophilic membrane • Compatible with aqueous and alcoholic solutions, as well as most HPLC solvents. • Convenient: Prewetting not required • Pure: Minimal extractables • High binding capacity for proteins, DNA and RNA Disposable Syringe Filter Units – DISMIC/ LABODISC • Minimum sample hold-up: Unit housings are specifically designed to maximize sample recovery • High purity: Non-pigmented housing and integral filter sealing assure that filtrates will not be adulterated due to pigment, dye, or adhesives leaching into the filtrate • Convenient: Each unit is clearly marked with an identifying code to denote pore size, membrane material and housing polymer • Sterile: Units can be purchased presterilized and individually packaged, or nonsterile in bulk pack • All polypropylene can be autoclaved Acrylic can not be autoclaved SPECIFICATIONS Cellulose Acetate ( Acetate) • Standard: A commonly used hydrophilic membrane • Low protein binding, suitable for aqueous protein solutions • Nitrate-free, suitable for groundwater filtration • Housing material: polypropylene ( 3, 13, 50 mm) or styreneacrylonitrile ( 25 mm) PTFE, hydrophilic • Versatile: Good chemical resistance • Compatible with many solvent mixtures used in HPLC, e.g. Acetonitrile/ Water PTFE, hydrophobic • Application: use as vent ORDERING INFORMATION: DISPOSABLE SYRINGE FILTER UNITS DISMIC Dia Membrane material Pore size( ¼ m) Housing material Quantity per package Nonsterile Sterile 25 MCE 0.20 Acrylic 50 25AS020AN 25AS020AS 0.45 A crylic 50 25AS045AN 25AS045AS Nylon 0.10 Polypropylene 100 30NP010AN* - 0.10 Acrylic 100 - 25NS010AS 0.22 Polypropylene 100 30NP022AN* - 0.22 Acrylic 10 0 - 25NS022AS 0.45 Polypropylene 100 30NP045AN* - 0.45 Acrylic 100 - 25NS045 AS 1.20 Polypropylene 100 30NP120AN* - 1.20 Acrylic 100 - 25NS120AS 5.00 Pol ypropylene 100 30NP500AN* - Cellulose Acetate 0.20 Acrylic 50 25CS020AN 25CS020AS 0.45 Acrylic 50 25CS045AN 25CS04 5AS 0.80 Acrylic 50 25CS080AN 25CS080AS PTFE, Hydrophilic 0.20 Polypropylene 100 25HP020AN - 0.50 Polypropylene 100 25HP05 0AN - PTFE, Hydrophobic 0.20 Polypropylene 50 25JP020AN - 0.50 Polypropylene 50 25JP050A N -
Tampilkan Lebih Banyak