Automatic Digital Refractometer RX-5000± cat.3261

The RX-5000± ( alpha) is an automatic digital refractometer which can set measurement temperature internally and has the following features for measuring the refractive index, Brix or concentration of various liquids accurately and speedily • Since the RX-5000± ( alpha) has a thermo-module to control temperature, a constant temperature water bath is not necessary. • The measurement starts automatically after the sample reaches your targeted temperature. • The refractive index and Brix at your targeted temperature are speedily displayed. • High Brix ± 0.03% and refractive index ± 0.00004 accuracy can be obtained. • The RX-5000± ( alpha) displays the top-and-bottom-limit-bar for your set control range. • If the measurement value differs from that of your Standard Liquid or the other refractometer, it can be adjusted in a certain range. • 60 kinds of user scales can be input according to your sample. • The RX-5000± ( alpha) is capable of calling up 30 latest measurements. * Special model of RX-5000± allows pre-programming of an additional scale ( such as honey moisture, inverted sugar% , salt concentration or butyro) in addition to Refractive Index and Brix ( % ) at customer' s request. This product comes standard with a two ( 2) year limited warranty against manufacturer’ s defects from the date of the original purchase. The warranty period can be extended to three ( 3) years if the product is registered with ATAGO. Specifications Model RX-5000± Cat.No. 3261 Scale Refractive index Brix Measurement Range Refractive index ( nD) : 1.32700 to 1.58000 Brix : 0.000 to 100.00% ( 5 to 60° C ATC) Resolution Refractive index ( nD) : 0.00001 Brix : 0.01% Temperature: 0.01° C Measurement Accuracy Refractive index ( nD) : ± 0.00004 Brix : ± 0.03% * When measuring a standard sucrose solution of up to 50% Brix or standard refractive index solution in MODE-1 at 20° C Repeatability Refractive index ( nD) : ± 0.00002 Brix : ± 0.01% * When measuring a standard sucrose solution of up to 50% Brix or standard refractive index solution in MODE-1 at 20° C Measurement Temperature 5 to 60° C Power Supply AC100V to 240V, 50/ 60Hz Dimensions & Weight 37× 26× 14cm, 6.4kg ( Main Unit only) Power consumption 65VA Mode MODE-1: Displays the measurement value once the sample reaches the target temperature. MODE-2: Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature. MODE-3: The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed. MODE-S: Displays the measurement value once a certain level of sample stability is achieved. Output terminals • Printer ( for ATAGO digital printers) • Computer - RS-232C Connection to a USB port requires a USB to RS-232 adapter ( optional) Warranty 2 years standard ( 3 years with product registration)