Detail Automatic Digital Refractometer RX-7000± Cat.3262
The RX-7000± ( alpha) is an improved ( upgraded) model for a measurement range of refractive index and measurement temperature of an RX-5000± ( alpha) . The thermo module for constant temperature is equipped.
It is best for measuring oils and fats of high melt point, higher refractive index perfumes, organic solvents, etc. The RX-7000± ( alpha) has the manual calibration facility which compensate difference in standard liquids and measurement values by other refractometers.
This product comes standard with a two ( 2) year limited warranty against manufacturer’ s defects from the date of the original purchase. The warranty period can be extended to three ( 3) years if the product is registered with ATAGO.
Specifications
Model RX-7000±
Cat.No. 3262
Scale Refractive index
Brix
Measurement Range Refractive index ( nD) : 1.32500 to 1.70000
Brix : 0.00 to 100.00%
( ATC : 5 to 70° C)
Resolution Refractive index ( nD) : 0.00001 ( 0.0001) *
Brix : 0.01% ( 0.1% ) *
Temperature: 0.01° C
* Factory default setting
Measurement Accuracy Refractive index ( nD) : ± 0.0001
Brix : ± 0.1%
* When measuring a standard sucrose solution of up to 50% Brix or standard refractive index solution in MODE-1 at 20° C
Repeatability Refractive index ( nD) : ± 0.00005
Brix : ± 0.02%
* When measuring a standard sucrose solution of up to 50% Brix or standard refractive index solution in MODE-1 at 20° C
Measurement Temperature 5 to 70° C
Power Supply AC100V to 240V, 50/ 60Hz
Dimensions & Weight 37× 26× 14cm, 6.8kg
( Main Unit only)
Power consumption 65VA
Mode MODE-1:
Displays the measurement value once the sample reaches the target temperature.
MODE-2:
Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature.
MODE-3:
The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed.
MODE-S:
Displays the measurement value once a certain level of sample stability is achieved.
Output terminals • Printer ( for ATAGO digital printers)
• Computer - RS-232C
Connection to a USB port requires a USB to RS-232 adapter ( optional)
Warranty 2 years standard ( 3 years with product registration)
Tampilkan Lebih Banyak