Universal Ovens Model UN 750

natural convection adjustment of pre-heated fresh air admixture by air flap control in 10% steps vent connection with restrictor flap adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display self-diagnostics for fault analysis 1 Pt100 sensor DIN class A in 4-wire-circuit digital timer adjustable from 1 minute to 99 days, 23 hours parameters adjustable on ControlCOCKPIT: temperature ( Celsius or Fahrenheit) , air flap position, programme time, time zones, summertime/ wintertime SetpointWAIT function - the process time does not start until the set temperature is reached Setting of languages on ControlCOCKPIT: German/ English/ Spanish/ French resolution of display for setpoint values 0.1° C up to 99.9° C, 0.5° C from 100° C and for actual values 0.1° C ( LED) calibration facility directly at ControlCOCKPIT for three freely selectable temperature values programme stored in case of power failure incl. works calibration certificate for + 160° C adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12 880 to switch off the heating approx. 20° C above nominal temperature w x h x d: 1224 x 1726 x 784 mm fully insulated stainless steel doors with 2-point locking ( compression door lock) rear zinc-plated steel on lockable castors w x h x d: 1040 x 1200 x 600 mm, 749 l easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides 2 stainless steel grids Max. loading of chamber: 300 kg min. 5° C above ambient up to + 300° C 400 V ( + / 10% ) , 3 phases/ N, 50/ 60 Hz / approx. 7.000 W net weight approx. 217 kg gross weight carton approx. 292 kg dimensions approx.: carton w x h x d: 133 x 192 x 105 cm the appliances must be transported upright